Paint Sprayer, Tacklife HVLP 1100ml/min,800W Paint Gun, with 2 X 1200ml Replacea

Description

Product Description
Tacklife - Professional team , which deals only with the development of the tools. We commit ourselves to using qualitative tools to improve the quality of life.
Tacklife SGP16AC Professional Spray Gun
The Tacklife spray gun
is produced with 6.5Amp powerful motor that can provide 110 DIN/min spraying, and the spraying flow up to 1100ml/min. With three spraying patterns, the painter sprayer can meet your different needs.
Motor Separation Design
- Motor separation design reduce the hand-held weight, making your paint job more easily.
Two Canister:
Two changeable 1200 ML containers make your paint more efficently, you can do two color painting simultaneously.
Quick Refill Lid
-The paint prayer is designed with the quick refill lid, so you can add the paint quickly without detaching the canister.
High Capacity: W
ith the 1200 ML container, you do not need to add the paint frequently, saving your time compared with other spray gun.
Long Power Line:
With 5.9Ft power line, you can change the working distance according to actual situation.
Heat Emission:
Special heat emission design provides production for the motor during the operation.
1.8M Air Hose&Shoulder Straps
Comes with the
1.8M Air hose
,the spray gun can meet your various distance works; and the shoulder straps make it easily taken to anywhere.
Quick Refill Lid
Compared with other spray gun, Tacklife paint sprayer features the
quick refilled lid
that you can add the paint quickly.
Material Thinning Chart
1) Oil enamel --25-50
2) Oil based primer--30-50
3) Oil stain--No thinning required
4) Chear sealer--No thinning required
5) Polyure thane--No thinning required
6) Varnish--20-50
Three nozzles & Control switch
The adjustable valve knob
can adjust the flow rate for coating speed and project size for precise paint application;
Spray width lever switch
You can adjust the spray amplitude by sliding the switch to right or left, making it easy to control the spraying situation.
Three nozzles (one copper nozzle)
Copper spray tips make the atomized particles more smooth.
Three Spray Patterns
The spray gun can be adjusted to three different spray patterns ：
horizontal flat jet, vertical flat jet and circular jet.
Simply rotating the spray tip to select either horizontal, vertical or circular spray pattern, you can choose the fittest one for your different applications.
Detachable Design
Each part of the spray gun can be detached, and equipped with cleaning tools, you can clean it easily after using.
Precautions
TIP SELECTION:
Please make sure that the 1.0mm spray tip is fit for the Φ1.0mm nozzle size,and the 2.5mm is fit for the 2.0mm/ 2.5mm nozzle size
CHECKING:
Before using the spray gun or after changing the nozzle, pay attention to check whether the seal ring in the right place or not.The seal ring should be carefully stored to avoid loss, check if nozzle, aircap, quick refill lid and canister are tightly assembled, check whether the air hose works well or not.
STORAGE:
Do not expose it to rain or wet conditions.Please keep the motor and the plug dry, other wise it may cause unit curcuit short.
CLEANING:
If using water based material, clean the sprayer by running water through pickup tube inlet.
If using oil based materials, clean pickup tube inlet with the appropriate cleaning solution.
PROBLEM:
Dripping:Please check whether the nozzle/Tip collar is broken/ loose or not, whether thee Y-type seal ring of nozzle is broken or not.
Atomization is too coarse:Please check whether the viscosity of material is too high, whether the control knob is setted too high, whether the material accumulated /clog is inside nozzle,whether the nozzle size is too big or not.
NOTE:
please do not spray upward.